Description

4PCS 2" Wheel Spacer 5x127mm For Buick LeSabre Jeep Grand Cherokee Wrangler PRODUCT DESCRIPTION ONE YEAR WARRANTY Description: 1) Thickness: 2" / 50mm 2) Vehicle Bolt Pattern(PCD): 5x5" / 5x127mm 3) Wheel Bolt Pattern(PCD): 5x5" / 5x127mm 4) Hub Diameter: 87.1mm / 4.43" 5) Thread Size: 1/2"x20 Note: Please make sure you take the proper neasurements gefore purchasing Package include: 4Pcs Wheel Spacers Adapters What should I pay attention to during installation? 1) Check to make sure that the wheel spacer fits perfectly with the hub/axle stub and the inner mounting surface of the wheel. 2) Make sure that the wheel bolts being used are of the appropriate length, not too long or too short. 3) DO NOT proceed if both of the wheel spacer do not fit. 4) Please be sure to clean the rust on the hub before starting the installation, otherwise it will affect the working life of the spacers. 5) Make sure that you get 5-7 FULL TURNS of the lugs when installing. Torque them down to the manufacturers specs (up to and not greater than 110ft lbs). 6) Avoid using an impact wrench because improper usage may cause the lug nuts/bolts to break or loosen while driving causing a potential injury or accident. 7) All lug nuts, bolts and torque must be checked after driving the first 50 miles after installation. Afterwards, please check all lug nuts and bolts every 3,000-5,000 miles. 8) Alignment is necessary after installation, this will prevent any wobble and vibration from occurring. How to measure the fender gap to choose suitable thickness? 1) Line up a straight edge ruler against the sidewall of the tire, use the measuring device to measure from the inside of the ruler to the inner fender lip. 2) Please take multiple measurements and use the smallest data point.(The most closest spot may be at the front or rear edge of the fender). The maximum recommended spacer thickness= the smallest gap - 3/8"(10mm) About the wheel bolts: Your Factory wheel studs may extend past the surface of the wheel spacers. In this case you will need to: 1) Shorten the factory studs. 2) The wheels need to have the open slots (cavities) between mounting holes. 3) Purchase a set of shorter studs and replace them with the factory studs. Fitment: For Buick: Buick LeSabre 1961-1985 Buick Riviera 1964-1978 For Cadillac: Cadillac DeVille 1959-1983 Cadillac Eldorado 1967-1978 Cadillac Fleetwood 1993-1996 Cadillac Seville 1977-1979 For Chevrolet: Chevrolet Astro 1985-2002 For Ford: Ford Thunderbird 1973-1976 For GMC: GMC Safari 1985-2002 For Jeep: Jeep Commander (XK) 2006-2010 Jeep Grand Cherokee (WJ) 1999-2004 Jeep Grand Cherokee (WK) 2005-2010 Jeep Wrangler (JK) 2007-2018 For Lincoln: Lincoln Continental 1973-1979 For Mercury: Mercury Marquis 1973-1978 SHIPPING RETURN WARRANTY SHIPPING · Shipping time: 1-6 business days in USA · After shipping, the tracking No. available by message · We ship to eBay address RETURN No returns are accepted without an RMA number. · Refund is valid within 60 days after the date delivered · Refund will be given as money back or replacement · The money less the freight cost will be refunded due to their own fault · Item must be returned in original packing same as reached · Buyers are responsible for the return shipping cost. WARRANTY · Buyers pay return and replacement shipping cost · We will not refund any labor cost